Clutch Adjusting Rod. Fits 1990up Belt Drives. 2-9/16in. long. - Belt Drives Ltd

Used with all BDL belt drives both open style and closed primary style without Ball Bearing clutch

* 2-9/16" overall length & dark zinc plated - inc's 2 o-rings

Tech Tips:-

UPDATED DESIGN

* Fits all 1990up open belt drive kits with BDL's BPP-100 Pressue Plate

* Note: you must install the new dual O-Ring adjuster screw from the backside of the pressure plate, so as not to damage O-Rings. The O-Rings now seal mainshaft internally from oil transfer into clutch.

* Lubricate O-Rings with O-Ring lube or transmission oil!

CLUTCH HUB NUT NOTE:

The use of RED Thread Locker is required! Hub nut is LEFT HAND Thread! Torque to 70-80ft/lbs